Using VM0.5, when I load the Kicad schematic, I get the following error:
The following libraries could not be found:
- power
- device
...
- bitcraze
If I use CvPcb, I get this error:
No PCB footprint libraries are listed in the current footprint library table.
Then:
Some or all of the assigned footprints contain legacy entires. Would you like CvPcb to attempt to convert them to the new footprint library table format?
Yes, just generates more errors about not finding footprint library files such as sockets.mod
I am pulling my hair out. I've tried to find the libraries. Download from Github, upgrade to a more recent version on Kicad. But I'm a Linux newbie, so all have failed me.
Help!
Kicad library problems
Re: Kicad library problems
I'm also having troubles. Is the KiCAD layout project on Github missing the footprints library?
The project contains the following library reference:
That directory doesn't exist though. Therefore pcbnew cannot find the BF090-10-X-B2 footprint.
The project contains the following library reference:
Code: Select all
LibDir=../kicad-libs/footprints
Re: Kicad library problems
We have had many problems with our kicad-libs after KiCad changed how they work with libs and therefore we have not been able to push them. Apparent the footprints are not saved in the cache lib which is why it doesn't work. I have committed a new version with the connector footprint included until we have solved the hole kicad-libs we use. Hopefully it works now!
Re: Kicad library problems
I can't quite get it to work yet. Steps I did:
1. Re-checkout the project
2. Load the schema, add the no connect flag to all pins
3. Delete Bitcraze icon to prevent it from showing up in the netlist
4. Do the electrical checks, all pass
5. Load the netlist to check that all parts have a footprint assigned
6. Open PCBNew
7. Read the current netlist
When I do this, I get the following error messages:
1. Re-checkout the project
2. Load the schema, add the no connect flag to all pins
3. Delete Bitcraze icon to prevent it from showing up in the netlist
4. Do the electrical checks, all pass
5. Load the netlist to check that all parts have a footprint assigned
6. Open PCBNew
7. Read the current netlist
When I do this, I get the following error messages:
Code: Select all
Reading Netlist "/home/danilo/Projects/crazyflie2-exp-template-electronics/ecad/template.net"
Component "P2": Mismatch! module is [connectors:CF2-EXP-SMD-HOLES] and netlist said []
Component "P1": Mismatch! module is [connectors:CF2-EXP-SMD-HOLES] and netlist said []
Re: Kicad library problems
I think it is because the footprint information is not assigned in the schematics. If you instead select to read the cmp file (generated with CvPcb) under "Module name source" when doing the netlist import in PCBnew it should work fine.
Re: Kicad library problems
me too.
here's what i get when i try to open /home/bitcraze/projects/crazyflie2-exp-template-electronics/ecad/template.pro
i click on eeschema button.
i get the following in a pop-up window:
"The following libraries were not found:
kicad version4.0.4+e1-6308~48~ubuntu14.04.1-stable, release build
this is running from within the virtual machine.
i just updated all projects.
i've also allowed the automatic system software upgrade to run.
here's what i get when i try to open /home/bitcraze/projects/crazyflie2-exp-template-electronics/ecad/template.pro
i click on eeschema button.
i get the following in a pop-up window:
"The following libraries were not found:
- special
wireless
regulators
my_power
power_ic
usb_ic
imu_ic
mcu-st
connectors
bc-memory
xtal
bitcraze
kicad version4.0.4+e1-6308~48~ubuntu14.04.1-stable, release build
this is running from within the virtual machine.
i just updated all projects.
i've also allowed the automatic system software upgrade to run.
Re: Kicad library problems
I think Kicad is changing their format but there should be cached versions available of the symbols. Does it work if you ignore the warning?