USB PPM RC Transmitter YAW only in one direction
Posted: Tue Oct 14, 2014 11:33 am
I am using a Spektrum DX9 RC transmitter hooked up to to a USB PPM Encoder.
I have it all set up and working with a custom mapping i have attached below.
The only problem i have is that the YAW control only works one way. Let me explain...
In the main window of the client in the Target column you have the set target angles. (these jitter around a lot but can be tamed with the Trim)
Under YAW i have 0.00 and when i yaw left on my transmitter it goes into negative however when i yaw right it doesn't go above 0.00. Roll and pitch work fine, both negative and positive.
I have a new profile on my transmitter with nothing but some Expo set, and have no idea why i can't yaw in both directions.
PLEASE HELP
I have it all set up and working with a custom mapping i have attached below.
The only problem i have is that the YAW control only works one way. Let me explain...
In the main window of the client in the Target column you have the set target angles. (these jitter around a lot but can be tamed with the Trim)
Under YAW i have 0.00 and when i yaw left on my transmitter it goes into negative however when i yaw right it doesn't go above 0.00. Roll and pitch work fine, both negative and positive.
I have a new profile on my transmitter with nothing but some Expo set, and have no idea why i can't yaw in both directions.
PLEASE HELP
Code: Select all
{
"inputconfig": {
"inputdevice": {
"updateperiod": 10,
"name": "DX9",
"axis": [
{
"scale": -1.6,
"type": "Input.AXIS",
"id": 0,
"key": "thrust",
"name": "thrust"
},
{
"scale": 1.0,
"type": "Input.AXIS",
"id": 3,
"key": "yaw",
"name": "yaw"
},
{
"scale": -2.6,
"type": "Input.AXIS",
"id": 1,
"key": "roll",
"name": "roll"
},
{
"scale": 2.6,
"type": "Input.AXIS",
"id": 2,
"key": "pitch",
"name": "pitch"
},
{
"scale": -1.0,
"type": "Input.BUTTON",
"id": -1,
"key": "pitchcal",
"name": "pitchNeg"
},
{
"scale": 1.0,
"type": "Input.BUTTON",
"id": -1,
"key": "pitchcal",
"name": "pitchPos"
},
{
"scale": 1.0,
"type": "Input.BUTTON",
"id": -1,
"key": "estop",
"name": "killswitch"
},
{
"scale": -1.0,
"type": "Input.BUTTON",
"id": -1,
"key": "rollcal",
"name": "rollNeg"
},
{
"scale": 1.0,
"type": "Input.BUTTON",
"id": -1,
"key": "rollcal",
"name": "rollPos"
},
{
"scale": 1.0,
"type": "Input.BUTTON",
"id": -1,
"key": "althold",
"name": "althold"
},
{
"scale": 1.0,
"type": "Input.BUTTON",
"id": -1,
"key": "exit",
"name": "exitapp"
}
]
}
}
}