Hiiii
I just started with the wifi streamer example. I wish to connect the crazyflie to my own wifi and send the images to my computer via wifi. I have all the hardware neede, the Olimex debugger and the adapter.....Also GAP_SDK and NINA built with docker both of them. I found the way to run the AP streamer by python, but how can I change the working mode in the aideck to convert it into a wifi streamer???
WIFI streamer example
Re: WIFI streamer example
Hi!
You will need to reflash the Nina in the current state of the firmware in order to do that: https://www.bitcraze.io/documentation/r ... -streamer/
So with make menuconfig make sure to deselect 'act as access-point' and the add the credentials. I see that the instructions are not super clear on that so I'll update that.
You will need to reflash the Nina in the current state of the firmware in order to do that: https://www.bitcraze.io/documentation/r ... -streamer/
So with make menuconfig make sure to deselect 'act as access-point' and the add the credentials. I see that the instructions are not super clear on that so I'll update that.