Hi, Bitcraze!!
I'm Japanese college student.
I'm assembling big quadrotor with big quad deck.
And my esc does not have 5v output. Only have signal and GND.
So I try to supply big quad deck with 5v power to from PDB.
Now my question is where should I connect 5v output and GND on the big quad deck.
I read this topic and I think this looks like it's done.
viewtopic.php?p=23637&hilit=bigquad#p23637
thanks in advance.
[SOLVED]How to supply big quad deck with 5v power from PDB
[SOLVED]How to supply big quad deck with 5v power from PDB
Last edited by kato on Wed Apr 20, 2022 5:20 am, edited 1 time in total.
Re: How to supply big quad deck with 5v power from PDB
Hi!
You can connect the 5V to any free pin marked 5V on the bigquad deck. And the same with ground.
You can connect the 5V to any free pin marked 5V on the bigquad deck. And the same with ground.
Re: How to supply big quad deck with 5v power from PDB
Thank you for your reply very much!!
I connect crazyflie and bigquad deck like below. And I use Buzz pin like below. I connected 5V to Buzz pin but crazyflie didn't start.
Is this correct?
I connect USB to crazyflie and cfclient console show this message. Must the motor be connected to the Bigquad deck?
Please help me.
Thanks.
I connect crazyflie and bigquad deck like below. And I use Buzz pin like below. I connected 5V to Buzz pin but crazyflie didn't start.
Is this correct?
I connect USB to crazyflie and cfclient console show this message. Must the motor be connected to the Bigquad deck?
Please help me.
Thanks.
Re: How to supply big quad deck with 5v power from PDB
Hi bitcraze.
I got it!!
Crazyflie Started!
Thanks!!
I got it!!
Crazyflie Started!
Thanks!!