Hi all,
I have been unsuccessfully trying to change the address of my Crazyflies through the "Configure 2.X" tab in the cfclient. What happens is that I can change the address in the Configure 2.X pop-up window, but the "write" button at the bottom is grey and cannot be pressed. The nRF51 and STM firmwares are both up to date. I finally managed to change the address successfully by writing directly to the EEPROM by following the instructions here: https://www.bitcraze.io/documentation/r ... nt/eeprom/
I was wondering if you are also experiencing this issue in Cfclient or if there is something I should do on my side to fix it.
Thank you,
Chiara
Failed to change Crazyflie address through Cfclient
-
- Bitcraze
- Posts: 630
- Joined: Tue Jun 30, 2015 7:47 am
Re: Failed to change Crazyflie address through Cfclient
It all sounds a bit strange, I have not seen this.
Did the reset of the EEPROM solve the problem, is the "Write" button enabled now?
Did the reset of the EEPROM solve the problem, is the "Write" button enabled now?