Hei,
when reading through the AI deck description in the shop I read "To program this board a compatible JTAG programmer/debugger is needed, see resources.". Under resources, I didn't find anything else about debuggers. I wonder whether the Debug Adapter Kit from your shop would qualify as one? If so, maybe it's good to specify that more clearly
Best,
Dominik
is the debug adapter compatible with the AI deck?
-
- Beginner
- Posts: 17
- Joined: Tue Jun 01, 2021 6:38 am
Re: is the debug adapter compatible with the AI deck?
Hi!
You can use the debug adapter kit the go from the 20 pin thick ribbon cable from the Olimex ARM-USB-TINY-H JTAG (Jlink should work too), to a thinner 10 pin cable that you connect to the AIdeck.
It was usually part of the AIdeck documentation, but now it has disappeared (except for this image).
You can use the debug adapter kit the go from the 20 pin thick ribbon cable from the Olimex ARM-USB-TINY-H JTAG (Jlink should work too), to a thinner 10 pin cable that you connect to the AIdeck.
It was usually part of the AIdeck documentation, but now it has disappeared (except for this image).