cfclient can't see CF on my PC, but can see on my notebook
Posted: Fri May 30, 2014 4:17 pm
Hi,
I just encountered with a problem with connecting cfclient to the crazyflie.
First, I just finished soldering new crazyflie (bought for a while, but left it in the box.) After flashing with the newest firmware, I tried connecting to my PC, which I have been using with another crazyflie for a while, with the driver created by Oliver for his Kinect control program. However, the flie is not seen by the driver (radio:0/10/250K didn't appear). Sometimes, it appears and can be connected, but not stable and keep losing connection.
I also tried with the original cfclient, and the result is the same.
Then, I tried using my notebook with cfclient. The connection works well.
I then switch the two crazyradios, but the PC still cannot connect to the flie, while the notebook can. So, the crazyradio is not the problem.
Now I just flashed it with the custom firmware by Oliver, and nothing changed.
I also tested with my older crazyflie, and it can be connected to both PC and notebook. (Unfortunately, I think I have burned the connection of M4 on the PCB while changing the broken motor holder, and it cannot be used for flying now as M4 is not rotating.)
I think the firmware flashing failed once during the flash, but have no idea if it can affect the connection or not.
Any idea what happened?
Thank you.
(PS. I just realized I should post it here, not in the General Discussion, so I delete that one and repost here.)
I just encountered with a problem with connecting cfclient to the crazyflie.
First, I just finished soldering new crazyflie (bought for a while, but left it in the box.) After flashing with the newest firmware, I tried connecting to my PC, which I have been using with another crazyflie for a while, with the driver created by Oliver for his Kinect control program. However, the flie is not seen by the driver (radio:0/10/250K didn't appear). Sometimes, it appears and can be connected, but not stable and keep losing connection.
I also tried with the original cfclient, and the result is the same.
Then, I tried using my notebook with cfclient. The connection works well.
I then switch the two crazyradios, but the PC still cannot connect to the flie, while the notebook can. So, the crazyradio is not the problem.
Now I just flashed it with the custom firmware by Oliver, and nothing changed.
I also tested with my older crazyflie, and it can be connected to both PC and notebook. (Unfortunately, I think I have burned the connection of M4 on the PCB while changing the broken motor holder, and it cannot be used for flying now as M4 is not rotating.)
I think the firmware flashing failed once during the flash, but have no idea if it can affect the connection or not.
Any idea what happened?
Thank you.
(PS. I just realized I should post it here, not in the General Discussion, so I delete that one and repost here.)